Accepted Papers
Main Track
Performance Evaluation of Mobility in Non-Terrestrial Networks
Chen, Li-Sheng (National Ilan University); Liao, Shu-Han (Tamkang University)
Detection of anomalies in machine operation based on use of IO-Link technology and vibration analysis
Vagas, Marek (Technical University of Kosice); Galajdová, Alena (Technical University of Košice); Rákay, Róbert (Technical University of Košice); Holubek, Radovan (Slovak University of Technology)
Influence of technological factors on crack dynamics in cataphoretic coatings
Fejko, Patrik (TUKE, FVT); Dobránsky, Jozef (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov; Peti, Damián (Technical University of Košice, Faculty of Manufacturing Technologies); Simkulet, Vladimir (Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Bayerova 1, 080 01 Presov, Slovakia); Gombár, Miroslav (University of West Bohemia Pilsen, Faculty of Mechanical Engineering, Univerzitní 8, 306 14 Plzeň, Czech Republic)
Definition of Safety and Comfort Zones in Human-Robot Interaction Applications
Spurný, Tomáš (VSB – Technical University of Ostrava); Vysocký, Aleš(VSB – Technical University of Ostrava)
PCC-based Forward Kinematics of One-Segment Fluidic Continuum Arm with Granular Jamming
Čakurda, Tomáš (Department of Industrial Engineering and Informatics, Technical University of Kosice, Slovakia); Pomin, Pavlo (Department of Industrial Engineering and Informatics, Technical University of Kosice, Slovakia); Trojanova, Monika (Department of Industrial Engineering and Informatics, Technical University of Kosice, Slovakia); Hošovský, Alexander (Department of Industrial Engineering and Informatics, Technical University of Kosice, Slovakia)
Later Track
Virtualization of Beam Deflection Monitoring System Comprising Inductive Linear Sensors
Krenicky, Tibor (Technical University of Kosice); Romaniuk, Vitalii (TUKE FVT); Natmeladze, Nino (TUKE)
Study of possible defects of the clamping joint created by additive technology
Hrehova, Stella (Faculty of Manufacturing Technologies Technical University in Kosice with seat in Presov); Lazorik, Peter (Technical University of Kosice, Faculty of Manufacturing Technologies, Slovakia); Antosz, Katarzyna (Rzeszow University of Technology, Poland)
The Necessity of Digitalization of Small and Medium-Sized Enterprises in Slovakia
Hricova, Romana (TUKE)
Enhancing Precision, Efficiency, and Adaptability in 3D Printer Monitoring through Real-Time Control Systems
Kalman, Olha (Technical University of Košice); Lazorik, Peter (Technical University of Košice); Rybarczyk, Justyna (Poznan University of Technology); Husar Jozef (Technical University of Košice)
Roll of Flexibility Decomposition in Sustainable SMEs Development under Stress Conditions
Basova, Yevheniia (National Technical University “Kharkiv Polytechnic Institute”); Dobrotvorskiy, Sergey (National Technical University “Kharkiv Polytechnic Institute”); Yakovenko, Ihor (Department of Technology of Mechanical Engineering and Metal-Cutting Machine Tools | Educational and Scientific Institute of Mechanical Engineering and Transport | National Technical University “Kharkiv Polytechnic Institute); Iakovets, Angelina (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov)
Application of Large Language Models to the Lot-Sizing Problem: An Analysis
Ribeiro, Andre (Polytechnic Institute of Porto); Santos, Andre S. (Polytechnic Institute of Porto); Varela, Leonilde (University of Minho); Leão, Celina P. (University of Minho); Leal, Nuno (Sonae Arauco, Portugal); Machado, Jose (University of Minho)
Impact of Voltage on Coating Thickness and Surface Morphology in Automated Cathodic Electrodeposition Line
Peti, Damián (Technical University of Košice, Faculty of Manufacturing Technologies); Dobránsky, Jozef (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov); Gombár, Miroslav (University of West Bohemia Pilsen, Faculty of Mechanical Engineering, Czech Republic); Fejko, Patrik (TUKE, FVT); Ropovík, Róbert (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov, Slovak Republic)
Interactive simulation in VR using the MoreViz module
Ivan, Ján (Technical University of Košice, Faculty of Manufacturing Technologies with the seat in Prešov)
Last Track
Planning Increment Execution in a Data Programme: Challenges and Lesson Learns
Haidabrus, Bohdan (Riga Technical University); Grabis, Janis (Riga Technical University); Druzhinin, Evgeniy (National Aerospace University); Kolesnikova, Kateryna (International IT University); Balog, Michal (AMBIS University)
Utilization of Extended Reality (XR) Technologies for Business and Industrial Applications: Design and Implementation of an Augmented Reality Solution
Hollesch, Lukáš (VSB – Technical University of Ostrava); Dulovec, Jan (VSB – Technical University of Ostrava); Stasa, Pavel (VSB-Technical University of Ostrava); Beneš, Filip (VSB – Technical University of Ostrava); Holusa, Veroslav (VSB-Technical University of Ostrava)
Application of the DJI Mavic 3 Drone for Photogrammetric Modeling of Surface Mines
Dulovec, Jan (VSB – Technical University of Ostrava); Hollesch, Lukáš (VSB – Technical University of Ostrava); Stasa, Pavel (VSB – Technical University of Ostrava); Beneš, Filip (VSB – Technical University of Ostrava); Svub, Jiri (VSB – Technical University of Ostrava)
Residual Stress Factor in Fatigue Strength of High-Strength Steels
Subbotina, Valeriia (National Technical University “Kharkiv Polytechnic Institute”); Bilozerov, Valerii (National Technical University “Kharkiv Polytechnic Institute”); Subbotin, Oleksandr (National Technical University “Kharkiv Polytechnic Institute”); Ryaboshtan, Valentyn (National Technical University “Kharkiv Polytechnic Institute”); Ivanov, Vitalii (Technical University of Kosice)
Impact of Torque Ripple on Material Surface Measurement in Additive Manufacturing
Kondrát, Martin (Technical University of Kosice); Duhančík, Michal (Technical University of Kosice); Zidek, Kamil (Technical University of Kosice); Andrusyshyn, Vladyslav (Technical University of Kosice)
A Unified Framework for Real-Time Tracking and Analysis of Soft Robotic Motion
Pitel, Jan (Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Department of Industrial Engineering and Informatics); Sokolov, Oleksander (Technical University of Kosice); Iakovets, Angelina (Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Slovak Republic); Sokolov, Serhii (Sumy State University); Leontiev, Petro (Sumy State University)
Modelling and simulation of dynamic systems for efficient control of production processes using AnyLogic software
Pivtorak, Oleksandr (Technical University of Kosice); Baron, Petr (Technical University of Kosice)
Methods and tools of education in industrial engineer-ing
Matisková, Darina (Technical University of Kosice)
Enhancing Efficiency and Sustainability in the Printing Industry: The Impact of SMED and Lean Strategies
de Sá, José Carlos (School of Engineering of Porto (ISEP), Polytechnic of Porto); Costa, Jose (School of Engineering of Porto (ISEP), Polytechnic of Porto); Silva, Francisco J.G. (School of Engineering of Porto (ISEP), Polytechnic of Porto); Cardoso, Mónica (School of Engineering of Porto (ISEP), Polytechnic of Porto); Ulewicz, Robert (Department of Production Engineering and Safety, Faculty of Management, Czestochowa University of Technology)
Protective Diffusion Coatings on Steels and Hard Alloys
Berladir, Khrystyna (Technical University of Kosice); Dehula, Andrii (Sumy State University); Hryb, Vladyslav (Sumy State University); Hovorun, Tetiana (Sumy State University); Iakovets, Angelina (Technical University of Kosice, Faculty of Manufacturing Technologies with a seat in Presov, Slovak Republic)
Energy consumption online monitoring
Krenicky, Tibor (Technical University of Kosice); Pitel, Branislav (Technical University of Kosice)
Optimalisation of Scanned Digital Twin Models for XR Devices in Concept of Industry 5.0
Nazim, Anastasiia (Technical University of Kosice, Faculty of Manufacturing Technologies with the seat in Presov, Slovakia); Zidek, Kamil (Technical University of Kosice, Faculty of Manufacturing Technologies with the seat in Presov, Slovakia); Duhančík, Michal (Technical University of Kosice, Faculty of Manufacturing Technologies with the seat in Presov, Slovakia); Lazorik, Peter (Technical University of Kosice, Faculty of Manufacturing Technologies with the seat in Presov, Slovakia); Bonello, Amberlynn (Department of Industrial and Manufacturing Engineering, Faculty of Engineering, University of Malta, Malta)
